On-Site Magazine

Products


Products Compact Equipment

Demag releases AC 45 City compact crane

September 18, 2018 by On-Site Magazine

The AC 45 City compact crane from Demag, a Terex brand, has a length of 8.69 m and a height of 3.16 m. The three axle unit features an IC-1 Plus control system and fully roadable unit with a maximum

Products ConstructionHeavy Equipment

Kinshoffer grapples offer precision, longevity

September 18, 2018 by On-Site Magazine

Kinshoffer D-Series grapples are available for 4,400 lb. to 176,000 lb. excavators. The grapples are powered by hydraulic cylinders with hydraulic damping protection. D-Series feature pressure relief valves and a perforated shell design, as well as a non-return valve designed

Products Compact Equipment

Cat 903D compact wheel loader focuses on performance, operator comfort

September 11, 2018 by On-Site Magazine

From Cat, the 903D compact wheel loader features a 40-hp, C2.4 engine and hydrostatic transmission that provides travel speeds up to 12.4 mph. An auxiliary hydraulic system delivers a flow of up to 14 gpm at pressures up to 3,481

Products Heavy Equipment

John Deere rolls out upgrades to backhoe, tractor loader models

September 11, 2018 by On-Site Magazine

John Deere has upgraded its 310 EP backhoe and 210L EP tractor loader. Both models feature a 69-hp Yanmar 3.3L Interim Tier 4 diesel engine and variable displacement hydraulic pump. The 210L EP offers a loader lift capacity of 5,342

Products Software / Hardware

Topcon introduces Magnet Inspect software for UAV infrastructure inspection

September 4, 2018 by On-Site Magazine

From Topcon Positioning Group, Magnet Inspect is designed to facilitate data processing workflow for unmanned aerial vehicle (UAV) infrastructure inspection. The software manages UAV data sets to create inspection reports. It aims to allow operators to visually navigate UAV photos,

Products Heavy Equipment

Gehl adds track loader to Pilot Series line

September 4, 2018 by On-Site Magazine

The Pilot Series RT185 track loader from Gehl is powered with a 69.9-hp engine and two-speed hydrostatic drive system. It can lift up to 83 in., can carry 1,850 lbs. of material and has a ground clearance of 12.7 in.

Products Heavy Equipment

JCB releases three dumper models with focus on safety features

August 27, 2018 by On-Site Magazine

JCB North America has introduced three site dumper models, with maximum payload capacities ranging from 13,000 lbs. to 20,000 lbs. The range includes: 6T-I with either a front- or swivel-tip bucket, 7T-I Hi-Viz with front-tip, and the 9T-I with front-tip.

Products Heavy EquipmentSoftware / Hardware

John Deere adds SmartGrade to G-Series motor grader line

August 27, 2018 by On-Site Magazine

SmartGrade technology from John Deere is available for the company’s G-Series motor grader line. The Topcon 3D integrated grade control eliminates masts and cables from the moldboard. An automation suite is included with SmartGrade. The suite includes auto-articulation, blade flip

Products Heavy Equipment

Gehl introduces DL Gen:3 series telescopic handlers

August 20, 2018 by On-Site Magazine

Gehl has introduced four telescopic handler models: DL11-44 GEN:3, DL11-55 GEN:3, DL12-40 GEN:3 and DL12-55 GEN:3. DL Gen:3 Series models feature a single joystick control for boom extension and retraction, attachment tilt, auxiliary hydraulics and forward/neutral/reverse. Maximum life capacities range

Products ConstructionDemolitionHeavy Equipment

Kinshoffer drum cutters offer efficiency, power

August 20, 2018 by On-Site Magazine

The WS drum cutter series from Kinshoffer is designed for mining, tunneling, road construction and demolition. The cutters feature a pick angle and chisel arrangement. Four chisel tips are available to attach to the wear pick: standard, heavy-duty, wear-protected and

Products Health & Safety

Ranger Design releases new shelving for work vans

August 15, 2018 by On-Site Magazine

Ranger Design has released its next generation of van shelving for tradesmen on the go. The company says its 2018 lineup is has been tested for toughness, and offers durable, rattle-free shelves that allow for better organization and efficiency during

Products Software / Hardware

Doosan rolls out telematics management system

August 15, 2018 by On-Site Magazine

From Doosan Infracore North America, LLC, the DoosanConnect telematics management system is standard on all the company’s equipment, except DX63-3 and DX85R-3 compact excavators. The equipment includes a modem with cellular and satellite antennas, which collect data from sensors on

Products Heavy Equipment

JLG releases positive air shut off system for its telehandlers

August 7, 2018 by On-Site Magazine

JLG Industries, Inc. has announced the availability of a positive air shut off system for its telehandlers. The system is intended for applications where flammable materials could be drawn into the air intake system. It aims to block the engine

Products Heavy Equipment

Cat D8T dozer features increased blade capacity, power

August 7, 2018 by On-Site Magazine

From Cat, the D8T dozer features a fully-automatic four-speed transmission and blade capacity of 13.4 yd3. An added gear and lock-up clutch engagement is designed to aid in shifting. The D8T is available in standard and low ground pressure configurations,

Products Heavy Equipment

Doosan material handler promises enhanced grapple, increased visibility

July 30, 2018 by On-Site Magazine

From Doosan, the 162-hp DX225MH-5 material handler has a 4-ft. standard fixer cab rise with an optional 6-ft. cab rise or 6.5-ft. hydraulic cab riser. It offers multiple power modes, in addition to a lifting work mode that increases pump

Products Demolition

Brokk releases new demolition robots

July 30, 2018 by On-Site Magazine

Brokk has launched four new demolition machines. The models include: Brokk 170, Brokk 200, Brokk 300 and the diesel Brokk 520D. Weighing 3,527-lbs., the 170 delivers 299 ft.-lbs. of force and features a 24-kW electric powertrain. The 27.5-kW 200 model

Products Construction

JLG releases extendable truss attachment

July 24, 2018 by On-Site Magazine

JLG Industries Inc. has released a fork-mounted extendable truss attachment for telehandlers. It is intended for metal building erection, setting wooden trusses and putting up post frame buildings in addition to low-rise applications. The truss is designed to accommodate a

Products Heavy Equipment

Liebherr crawler excavator offers improved swing torque and engine power

July 24, 2018 by Jillian Morgan

The R 926 Compact crawler excavator from Liebherr offers an operating weight between 25.4 tonnes and 29.5 tonnes. It has a tail swing of 1.7 m and 1.9 m, with a swing radius of less than 4 m. The machine’s

Products

Genie releases high-float booms for sensitive ground applications

July 17, 2018 by Jillian Morgan

From Genie, the S-80 high float (HF) and S-85 HF telescopic booms are designed for heavy-lifting tasks in sensitive ground conditions. The booms offer dual lift capacity of 600-lbs. unrestricted and 1,000 lbs. restricted. Both models feature automatic envelope control

Products

Cat mobile shears offer long service life, cutting power

July 17, 2018 by Jillian Morgan

S2000/S3000 series mobile shears from Cat are designed from hydraulic excavators. The shears can be boom- or stick-mounted and are available in a straight or 360-degree-rotating configuration. Both models feature tapered spacer plates, a fully-enclosed cylinder rod and a bolt-open



close