On-Site Magazine

Products


Rapid Set cement products.
Products Construction

Rapid repairs

December 17, 2014 On-Site

Rapid Set cement products repair, restore and return concrete to full use in one hour. They are designed for high-strength structural restoration, vertical and overhead repairs, pavement rehabilitation, setting anchor bolts, floor repairs, pre-casting, highway and bridge repairs. Benefits include

DDH181X from Bosch
Products Construction

Drill drivers

December 10, 2014 On-Site

The DDH181X drill driver from Bosch Power Tools features Active Response Technology, which allows contractors to tackle high-torque applications while reducing the risk of kickback. An integrated acceleration sensor limits the tool’s rotation by detecting sudden movements and cuts off

Dexter + Chaney's Spectrum Construction Software.
Products Construction

Construction management software

December 10, 2014 On-Site

Dexter + Chaney’s Spectrum Construction Software is a fully web-based business, project, equipment and service management solution. The software is suitable for a range of clients, including heavy/highway and utility, general contractors, electrical, mechanical, and specialty subcontractors. It allows customers

Gomaco's Next Generation slipform pavers.
Products Construction

Low-maintenance pavers

December 9, 2014 On-Site

Gomaco’s Next Generation Commander III multi-application slipform pavers are equipped with a Gomaco G+ control system and new Tier 4 engines. They feature a redesigned frame and operator’s platform with a pivoting control console. The frame has been rebuilt to

Schwing's S20 boom pump.
Products Construction

Versatile boom

December 9, 2014 On-Site

Schwing has expanded its boom pump lineup with the S 20, which provides concrete contractors and specialty contractors with a versatile tool to expand concrete pumping possibilities while also performing conventional work. The four-section Double Z boom offers a total

Wacker Neuson's CT walk-behind trowels.
Products Construction

Safe walk-behind trowels

December 9, 2014 On-Site

Wacker Neuson offers a complete line of walk-behind trowels that range from edging, standard, high-horsepower and variable speeds units. The CT walk-behind line is designed to provide extra protection from an out-of-control spinning handle. When the operator lets go of

Husqvarna's DXR 140 remote-controlled demolition robot.
Products Construction

Demolition robot

December 9, 2014 On-Site

The DXR 140 from Husqvarna Construction Products is a remote-controlled demolition robot. Available with a 20 hp (15 kW) motor, the DXR 140 allows the operator to use up to 100 per cent of the breaker’s force. The power output

E-Z Drill's Model 210 concrete drill attachments.
Products Construction

Drill attachments

December 9, 2014 On-Site

Model 210 equipment-mounted concrete drill attachments from E-Z Drill are best suited for full-depth road repair and patching projects. The series consists of three models: the three-gang 210-3 EQ MT, four-gang 210-4 EQ MT and five-gang 210-5 EQ MT. All

Terex's FD4000 front discharge mixer truck.
Products Construction

Front-discharge mixer truck

December 9, 2014 On-Site

Terex’s FD4000 front discharge four-axle mixer truck can be powered by Cummins CNG engines, 2013 EPA-compliant Cum­mins or MTU diesel engines. It offers power packages ranging from 350- to 450-hp, and boasts a number of design improvements including a 15

John Deere's 329E compact track loader.
Products Construction

Large-frame compact track loader

December 9, 2014 On-Site

The John Deere 329E compact track loader (CTL) features an 83 hp, Interim Tier 4-emission certified engine. The large-frame CTL boasts a flat floor design with 33 per cent more foot room than previous models, and lower cab noise levels

Cat's 305.5E2 mini hydraulic excavator.
Products Construction

Hydraulic mini excavators

December 9, 2014 On-Site

Caterpillar’s 305.5E2 mini hydraulic excavators are designed with a new high-definition hydraulic (HDH) system, which provides load sensing and flow sharing capabilities leading to operational precision, efficient performance and greater controllability. The simple valve architecture reduces heat, which leads to

Doosan's C185 portable air compressor.
Products Construction

Gas-powered air compressor

December 9, 2014 On-Site

Doosan Portable Power has introduced its first gas-powered portable air compressor in the form of its most widely used model, the C185. The unit is used for a variety of applications, including powering handheld air tools, sandblasting, sprinkler and irrigation

Case's TR310 Alpha Series compact track loader.
Products Construction

Medium-frame compact track loader

December 9, 2014 On-Site

Case Construction Equipment’s Tier 4 Final TR310 Alpha Series compact track loader (CTL) features wider tracks (15.75 in.), a greater overall width (74.3 in.) and lower ground pressure (5.0 psi) than other medium-frame CTLs in the Case lineup. The TR310

Doosan Portable Powers G125WCU mobile generator.
Products Construction

Quiet and cool generator

December 2, 2014 On-Site

Doosan Portable Power’s G125WCU mobile generator features a cooling system with a variable speed-cooling fan to keep the generators cool while maximizing productivity and fuel efficiency in extreme temperatures. The enclosure includes deep air intake pockets that protect the generator

Terexs Bid-Well 4800 bridge paver.
Products Construction

Flexible paver

December 2, 2014 On-Site

Terex’s Bid-Well 4800 bridge paver boasts new features to improve the machine’s flexibility and ease of operation. The fogging system offers adjustable and removable spray nozzles designed to make the system more user-friendly. A skewable power crown adjuster can be

Dewalts D25723K hammer drill.
Products Construction

Hammer drill

November 26, 2014 On-Site

Dewalt’s D25723K hammer drill is designed with the Shocks Active Vibration Control System for less vibration and E-Clutch Anti-Rotational Technology for better control. The D25723K delivers powerful performance with 1260-2520 BPM and 11 joules of impact energy. It is ideal

John Deere's 824K-II wheel loader.
Products Construction

Four-wheel drive wheel loaders

November 26, 2014 On-Site

John Deere has updated three models in its K-Series four-wheel drive wheel loader lineup. The 744K-II, 824K-II and 844K-II meet Final Tier 4 emissions standards for maximum performance, efficiency and reliability. The K-Series-II loaders come equipped with higher-capacity Teammate V

Gilbert's Grizzly MultiGrip pile drivers.
Products Construction

Versatile pile driver

November 17, 2014 On-Site

Gilbert has designed a new series of side-grip vibratory pile drivers, the Grizzly MultiGrip. This excavator-mounted attachment is equipped with a side-grip clamping device designed to facilitate and speed up handling, driving and extracting piles and sheet piles. The first

John Deere's GoHaul mobile app.
Products Construction

ADT mobile app

November 17, 2014 On-Site

John Deere has launched the GoHaul mobile application for E-Series articulated dump truck (ADT) customers. This free app is available for iPhone and Android devices and acts as an operator’s quick reference guide, allowing contractors instant access to information. The

Volvo Construction Equipment's C-Series motor graders.
Products Construction

Premium grading

November 12, 2014 On-Site

Volvo Construction Equipment’s Tier 4 Final/Stage IV-compliant C-Series motor graders consists of four models: G930C, G940C, G946C (AWD) and G960C. The new C-Series motor graders include the latest D8J engines designed and built by Volvo. The engines provide three variable